Membrane material testing equipment - Packaging testing equipment & Testing Services - SYSTESTER - China Jinan Sike Testing Technology Co., Ltd.-PRODUCRS

GTR 721 is based on the differential pressure method, and is professionally applicable to the determination of gas transmission rate as well as solubility coefficient, diffusion coefficient and permeability coefficient of plastic films, laminated films, high barrier materials, sheeting, metal foils, rubber, tires and permeable membranes.

Vacuum differential pressure method
Built in embedded system with 24bit Δ-Σ AD, remote maintenance and upgrade
One-Click start a test and test automatically stop, no any manual operation is required during the process until the end of the test
Do NOT need to preset any test parameters before a test, zero operation experience requirements, proprietary technology
3 specimens test simultaneously and independently
According to the test state, the vacuum pump starts and stops automatically, do NOT need manual operation
Computer control, multiple test modes: Increment, proportional and intelligent
The temperatures of chambers which hollow inside and with circulating water are stable, high precision and wide range, 3 chambers with independent temperature sensors to monitor
Test under various RH conditions with Humidity generator (optional)
Built in environment temperature and humidity sensor
Permeability coefficient ,solubility coefficient and diffusion coefficient test
Various curves display: chambers temperature, test pressure, transmission rates, etc
Traceable reference film calibration
Supports DSM system (DSM, lab data management system)

Test range	0.05 - 190,000 cm3/m2·24h·0.1MPa (Standard)
Resolution	0.001cm3/m2·24h·0.1MPa
Samples	3, independent
Vacuum accuracy	0.1Pa
Temperature range	5C - 95C
Temperature accuracy	±0.1C
Humidity range	0%RH,35%RH-90%RH,100%RH (optional)
Humidity accuracy	±1%RH (optional)
Sample thickness	less 3mm
Sample size	>= 150mm * 94mm
Test area	48cm2
Test gas	O2, N2, CO2, He, etc
Differential pressure	-0.1MPa - 0.1MPa
Gas interface	Ф8mm
Dimension	730mm(L) * 510mm(W) * 350mm(H)
Power supply	AC 220V 50Hz
Net wt	63kg

ASTM D1434, ISO 15105-1,ISO 2556,GB/T 1038-2000,JIS 7126-1,YBB 00082003

Standard: Main Unit, Computer, G-TRANS Software, Temperature Controller, Vacuum Pump, Vacuum Pump Control Model, Tank Regulator, PCIE Card, Communication Cable, Sample Cutter, Vacuum Grease.

Optional: Humidity Generator, Reference Film, Vacuum Grease, Sample Cutter, DSM system.

Note: Specifications are subject to change without prior notice.